Cleaning removes dirt and unwanted surfaces. You can use a bucket and mop for floors and tiles or use a cloth to wipe windows and smaller surfaces. However, for deep cleaning, a steam cleaner can be efficient and quick. They come with different functions and designs to enable cleaning various surfaces. There are steam cleaners specified for carpets, tiles, vinyl floors, and ceramic floors.
How steam cleaners work
The steam cleaner uses heated water in the tank of the cleaner to remove steam. The steam has heat that melts the dirt while the moisture dilutes the adhesive dirt leaving the surface clean. Steam cleaners like all other appliances could be faulty after using them for a while.
Here are a couple of reasons why a steam cleaner will not work properly:
1. Clogged Nozzles
Hard water is one of the most common reasons why the steam nozzle would get blocked. When heated, the water forms calcium residues that remain inside the nozzle. After a while, the nozzle becomes completely blocked. In case you have no option but to use hard water, you can prevent clogging by cleaning the nozzle regularly. In extreme cases, you might have to change the nozzle. In this case always use the right spares, for example, if you have a karcher steam cleaner, you will need to get the specific karcher spares to ensure it works correctly.
2. An Empty Water Tank
The steam cleaner has a tank that is used to store the water to be heated so that it produces steam. It has a specific volume required for it to heat the water correctly. If the water is not enough the steam will not be produced, and the cleaning will stop. Plugging in the steam cleaner without the correct volume can damage it. Always ensure you have enough water in the tank before cleaning.
In a steam cleaner, the pressure builds up to release the steam. If it leaks, there will be no steam produced. This means that the steam cleaner will not work properly. This problem mostly comes from the cap. If it is broken or loose, it may cause leakages. You can tighten it or if damaged, consider getting a new one.
4. Failed Heating
For the cleaning, the water in the tank has to heat to produce steam. The heated water also helps to kill bacteria. The steam cleaner has a heater for this work. The heater could burn out and therefore, not heat the water. The heater makes a sound like water in a boiling kettle, and it should heat to about 100 degrees Celsius for enough steam. You can use a multimeter to check if the heater is okay. A functioning heater will show about 50 to 20 ohms. Before replacing, always find the right spare and ensure it is unplugged for safety.
If you have a steam cleaner and it stops working you now know what the problem could be. If you need spares, you can visit the spares2you website and purchase the spares you are looking for. They have a variety of all spares you need for your steam cleaner repair.
Article Submitted By Community Writer